日本SMC兩通電磁閥閥體形式 VXD2260-10-4DZ

請注意，即使壓力差高于zui小值。當閥門關閉操作壓力差，該壓力差可以低于
zui小。操作壓力差時，閥打開取決于供給源（泵，壓縮機等，），或用管限流的類型的電源。
大眾墊圈類型。加入10克管道30克DIN端子，分別為60克管道終端類型。
?請參閱“詞匯表"26頁上的zui大的細節。工作壓力差和zui大系統壓力。

Be aware that even if the pressure difference is above the Min. operating pressure differential when the valve is closed, the pressure difference may fall below the
Min. operating pressure differential when the valve opens depending on the power of the supply source (pumps, compressors etc.,) or the type of pipe restrictors used.
Mass of grommet type. Add 10 g for conduit, 30 g for DIN terminal, and 60 g for conduit terminal type respectively.
? Refer to “Glossary of Terms" on page 26 for details on the max. operating pressure differential and the max. system pressure.

日本SMC兩通電磁閥閥體形式 VXD2260-10-4DZ

VXD2142-03
VXD2142-04
VXD2152-06
VXD2262-10
VXD2272-32
VXD2382-40
VXD2392-50
VXD2130-02
VXD2130-03
VXD2140-03
VXD2130-04
VXD2140-04
VXD2150-06
VXD2260-10
VXD2270-32
VXD2380-40
VXD2390-50